GulfstreamComposites.com
Would you like to react to this message? Create an account in a few clicks or log in to continue.

EMC clear coat over existing varnish

2 posters

Go down

EMC clear coat over existing varnish Empty EMC clear coat over existing varnish

Post by bluewater Mon Apr 20, 2015 8:12 pm

Are there any compatibility issues with the EMC clear coat over marine spar varnish?

bluewater

Posts : 3
Join date : 2015-04-14

Back to top Go down

EMC clear coat over existing varnish Empty Re: EMC clear coat over existing varnish

Post by Admin - Shine Tue Apr 21, 2015 8:12 am

bluewater wrote:Are there any compatibility issues with the EMC clear coat over marine spar varnish?

Hi Bluewater, I would take the spar varnish off, it would be the weak link as far as bonding goes. From a surface contamination standpoint, I would not be 100% confident either unless I tested a piece first. If it were mine, I would sand the varnish (if you can sand it) then test the ST gloss over top on a small part. If it lays out without signs of surface contamination, then you should be good to go.
Admin - Shine
Admin - Shine
Admin

Posts : 488
Join date : 2015-03-31

https://gulfstreamcomposites.forumotion.com

Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum