making fairing boards
making fairing boards
Here are a couple pictures of the faring boards I made for this project. They take the 4.5" wide paper....
http://www.gulfstreamcomposites.com/category-s/155.htm
They are made with a flexible laminate (about 4mm or 3/16" thick), 36" long. Handles are dowels epoxied on. They are flexible enough to twist a little. the only thing that could make them a little better would be a firm rubber backing, but that is not needed by any means.
http://www.gulfstreamcomposites.com/category-s/155.htm
They are made with a flexible laminate (about 4mm or 3/16" thick), 36" long. Handles are dowels epoxied on. They are flexible enough to twist a little. the only thing that could make them a little better would be a firm rubber backing, but that is not needed by any means.
Similar topics
» Sandpaper for fairing boards
» Favorite Fairing Board
» making fiberglass stringers (forms)
» High density Foam Planks/boards
» Favorite Fairing Board
» making fiberglass stringers (forms)
» High density Foam Planks/boards
Permissions in this forum:
You cannot reply to topics in this forum